GP2500-MU-AS
Model Numbers: GP2500-MU-AS, GP2500-MU-AS-D1
Single ArcSafe AC Motors 2300V
MotorGuard applies a current limited, fixed DC voltage to the motor windings during idle periods. A solid state comparator circuit monitors measured leakage current to the ground. Two adjustable set points, factory preset to customer specifications, can be programmed to signal a pre-alarm, alarm and lockout the equipment from operating if the low set point is exceeded. The manual reset feature enables a return to operational status only after the alarm condition has been corrected. MotorGuard will not impair normal operation of the equipment being monitored.
Specifications
Input Voltage: 120 VAC, (optional 240 VAC), 50/60 Hz
Input Current: .15 A max. @ 120 VAC
Test Voltage: 2500/5000 VDC@ 350 μA max.
Maximum Line Voltage: 7500 V RMS (HVmodel –15 KV)
Control Sensing: N/O Contact or 120 VAC, 50/60 Hz
Alarm Time Delay: 0 –2 Minutes
Alarm/Lockout Contacts: 1 Form C, 5A @ 240 VACor 28 VDC
Pre-Alarm Contact: 1 Form C, 5A @ 240 VACor 28 VDC
LED Display: Power On: Green
Test On: Yellow
Pre-Alarm: Yellow Flashing
Alarm: Red Flashing
Meter Output: 1% Analog Signal
Accuracy: 1% Overall
Ambient Temperature: -20°F to 140°F
Size: 12″ H x 4″ W x 8.50″ D
Weight: 7.5 lbs.
Assembly: Meets UL 508/61010 specifications
Documents
Features
- Single Motor Model
- Auto/Manual test operation
- Adjustable alarm set point
- Adjustable pre-alarm set point
- Latching alarm contacts with manual reset
- Fused input and H.V. test lead
- 15 ft. two-way current-limited H.V. test switch
- 2500 VDC/5000 VDCtest voltage
- Remote Calibration and system test switch
- Long-life, flashing remote LED/switch assembly w/ 15 ft. cable
- 10 Year Warranty
Optional Features
- Panel Meter
- Transducer: 4-20 mA
- EZ-Mount bracket for switch assembly